cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
290
Views
0
Helpful
4
Replies
Highlighted
Beginner

MSE Reachability Status is always unreachable !!

I am using Prime infrastructure 3.1 and MSE's version is 7.4.100.0.

I created network topology and added access point's.Now I can see clients on the list but there is no clients on the site map.

Do you have any idea about problem ?

Everyone's tags (4)
4 REPLIES 4
Contributor

First thing first ensure

First thing first ensure compatibility for wireless infrastructure-  look at table 4

http://www.cisco.com/c/en/us/td/docs/wireless/compatibility/matrix/compatibility-matrix.html#52734

secondly if its compatible, you might want to match the key hash between WLC and MSE and ensure they are synced.

[root@mse ~]# cmdshell

cmd> show server-auth-info

----------------
Server Auth Info
----------------
MAC Address: 00:0c:29:xx:xx.xx
SHA1 Key Hash: 0a92acd20a9ee6b26159d4878d2bdcce7585xxxx
SHA2 Key Hash: b2516e4f014997aaf2d74468788ab308f2ed48da4ca6643ff1bfa84a6eecxxxx
Certificate Type: SSC

(5508-1) >show auth-list

Mac Addr                  Cert Type    Key Hash
-----------------------   ----------   ------------------------------------------
00:0c:29:a8:2d:50         LBS-SSC-SHA256      b2516e4f014997aaf2d74468788ab308f2ed48da4ca6643ff1bfa84a6eecxxxx

Let me know if this helps.

-Rate helpful posts-
Beginner

Its not working,I checked

Its not working,I checked compability guide everything is ok after that I checked key hash , they matched.

What should I check now ? 

Contributor

getserverinfo - make sure MSE

getserverinfo - make sure MSE is running properly

telnet -p 443 from prime to MSE to ensure reacheability

Lastly try "ncs stop"/"nsc start", some bugs with similar issue have workaround with this "CSCuy43823", if still dosen't work, open a TAC case.

-Rate helpful posts-
Beginner

The problem solved. 

The problem solved. 

Really thanks!

CreatePlease to create content
Content for Community-Ad
June's Community Spotlight Awards