cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

1067
Views
0
Helpful
10
Replies

Old AP1231 deployment to support WPA2

Hi everyone,

My customer has this OOOLD deployment where some AP1231 are still working they are upgrading part of the WLAN to LWAPP but may need to leave some AP in stan alone for a while.

I need to configure a new SSID that needs WPA2 enterprise AES but it seems that this version does not support WPA2. Could somebody confirm this? If it doesn't, from what version on is supported?

This is the IOS flash:/c1200-k9w7-mx.123-8.JEA/c1200-k9w7-mx.123-8.JEA

Thank you!

Everyone's tags (2)
1 ACCEPTED SOLUTION

Accepted Solutions
Hall of Fame Master

Re: Old AP1231 deployment to support WPA2

Most of those older APs don't have the hardware to support WPA2. It's not the software but the hardware/radios.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
10 REPLIES 10
Hall of Fame Master

Re: Old AP1231 deployment to support WPA2

Most of those older APs don't have the hardware to support WPA2. It's not the software but the hardware/radios.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Old AP1231 deployment to support WPA2

Thank you Scott!

Beginner

Hi Scott,

Hi Scott,

I know this is rather old thread but I am currently trying to push back in operation one of our old AP1231G with radio module AIR-MP21G-E-K9. Does it support WPA2 which we need to use?

Current software version is:

System Software Filename: c1200-k9w7-tar.123-8.JEE
System Software Version:   12.3(8)JEE
Bootloader Version:             12.3(2)JA4

Thank you

Hall of Fame Master

Re: Old AP1231 deployment to support WPA2

Just to note

Aironet 1200 series radio modules with the part numbers AIR-RM21A and AIR-RM22A

Note: The Aironet 1200 radio module with the part number AIR-RM20A does not support WPA 2.


Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Old AP1231 deployment to support WPA2

Where do you check those part numbers?

Hall of Fame Master

Re: Old AP1231 deployment to support WPA2

Try show ver or show hardware from the CLI

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Re: Old AP1231 deployment to support WPA2

Scott,

This is the show ver of one of those AP1231 but I couldn't find the part numbers you mentioned. Also I found this data sheet that specifies that the AP supports WPA2 please take a look: http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps430/ps4076/product_data_sheet09186a00800937a6.html

Cisco IOS Software, C1200 Software (C1200-K9W7-M), Version 12.3(7)JA, RELEASE SO
FTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2005 by Cisco Systems, Inc.
Compiled Tue 09-Aug-05 21:10 by kehsiao

ROM: Bootstrap program is C1200 boot loader
BOOTLDR: C1200 Boot Loader (C1200-BOOT-M) Version 12.3(2)JA3, RELEASE SOFTWARE (
fc2)

CMXYUMID01A04 uptime is 20 weeks, 5 days, 21 hours, 33 minutes
System returned to ROM by power-on
System restarted at 17:15:45 CDT-mx Fri Sep 21 2012
System image file is "flash:/c1200-k9w7-mx.123-7.JA/c1200-k9w7-mx.123-7.JA"


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco AIR-AP1231G-A-K9     (PowerPC405GP) processor (revision A0) with 14838K/15
36K bytes of memory.
Processor board ID FOC092464FP
PowerPC405GP CPU at 196Mhz, revision number 0x0145
Last reset from power-on
1 FastEthernet interface
1 802.11 Radio(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:14:A8:7F:D1:8F
Part Number                          : 73-8704-09
PCA Assembly Number                  : 800-23211-10
PCA Revision Number                  : A0
PCB Serial Number                    : FOC092464FP
Top Assembly Part Number             : 800-23304-09
Top Assembly Serial Number           : FTX0928R0JH
Top Revision Number                  : A0
Product/Model Number                 : AIR-AP1231G-A-K9

Configuration register is 0xF

Hall of Fame Master

Re: Old AP1231 deployment to support WPA2

Try this

Show controller dot11 0

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
Highlighted

Re: Old AP1231 deployment to support WPA2

What about this information? There is a lot more from the show command in case you need it...

interface Dot11Radio0

Radio AIR-MP31G, Base Address 0014.a837.0580, BBlock version 0.00, Software vers

ion 5.80.12

interface Dot11Radio0

Radio AIR-MP31G, Base Address 0014.a837.0580, BBlock version 0.00, Software vers

ion 5.80.12

Hall of Fame Master

Re: Old AP1231 deployment to support WPA2

That radio supports wpa2. You just have to verify all of the 1231's.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***
CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards