cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
735
Views
5
Helpful
1
Replies

Prime Infrastructure Upgrade - Running HA Prime as Active while upgrading Primary Prime

Scott Gillies
Level 1
Level 1

Hi

 

Is it possible to set a Secondary HA Prime as the Active prime while upgrading the Primary Prime?

 

This is to allow access to the Maps while upgrading the Primary Prime before upgrading the Secondary. 

 

Thanks in advance

1 Accepted Solution

Accepted Solutions

You have to break HA prior to the upgrade. So I do not think you can use secondary as primary while doing the upgrade

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-7/quickstart/guide/bk_Cisco_Prime_Infrastructure_3_7_0_Quick_Start_Guide.html 

 

HTH

Rasika

*** Pls rate all useful responses ***

View solution in original post

1 Reply 1

You have to break HA prior to the upgrade. So I do not think you can use secondary as primary while doing the upgrade

https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-7/quickstart/guide/bk_Cisco_Prime_Infrastructure_3_7_0_Quick_Start_Guide.html 

 

HTH

Rasika

*** Pls rate all useful responses ***

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: