Query Regarding Cisco Prime Infrastructure Syslog server (qradar)
I have a query regarding the syslog server of Prime.
Our end client is having IBM Qradar syslog server. And they have configured that in the Cisco Prime Infrastructure. However, no logs are being sent to the syslog server from the prime. It hasn't worked anytime.
Now I want to know if IBM qradar is compatible with Cisco Prime Infrastructure ? I am not getting any document where it shows what 3rd party syslog server is supported in prime.
As @marce1000 says syslog is a standard so there should not be any question of compatibility. It's much more likely to be a problem with the Prime configuration or possibly the syslog server configuration or maybe you have ACLs or firewall between the 2 servers blocking the syslog traffic (and presume the Prime server has a route to reach the syslog server)?
Hi, My customer wants to Download a report of users with MAC addresses who logged in June 2020. He is using PRTG but that Server is not connected with WLC. What we need to do to achieve this goal? Thanks in advance. Regards,Waqas
[ The link to the discussion will be published on November 10th ]
This event is an opportunity to discuss the LTE market trends from a consumer perspective, highlighting the 4G LTE service from Cisco Enterprise BU. Furthermore, we will discuss the strateg...
Hi All,We have 9100 AP trying to join on 9800 WLC. When AP try to join controller it gives below error Sending Join request to 172.16.31.66 through port 5254Discarding msg CAPWAP_WTP_EVENT_REQUEST(type 9) in CAPWAP state: Join(5)Discarding msg CAPWAP...
Hello, I hope somebody has a solution for the issue I am facing. I have 2 WAP150's, both with firmware 18.104.22.168, and I am not able to save a specific change. Under Wireless > Radio > Advanced Settings > Legacy Rate Sets I can unselect ra...