cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
736
Views
0
Helpful
3
Replies

restrict WLAN access based upon device type

wg wireless
Level 1
Level 1

hi,

i have a requirement to allow only certain device types (Apple Ipad only) on WLAN. Dont want to use individual MAC filters due to administrative overheads. Any suggestions?

3 Replies 3

Scott Fella
Hall of Fame
Hall of Fame

The only way you can just allow one type of device is the use of a profiler. Cisco ISE has a profiler, but you will need to get the advanced license also. I don't know how you would be able to do it any other way unless you manually configure each iPad to allow that device on your network.

Sent from Cisco Technical Support iPhone App

-Scott
*** Please rate helpful posts ***

Thanks for reply... can we somehow manage to identify Ipads with its pre-installed certificates?

Or can list of OUI help us in this regard?

Becuase ISE is not available here at the moment.

the OUI list won't help.  it's not specific to the device, just the manufacturor.  So if you were to block by OUI, you would stop all Apple devices from being able to get on the network.

Steve

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: