Solved: Re: Sending traps from Cisco Prime

ahmad.syed · ‎02-14-2019

Hi All,

Need your help.

I have configured Notification receiver on CIsco prime tool for sending traps to other Monitoring device. I am not getting those traps on other monitoring device. Can you please suggest, how to check on CIsco Prime tool, that we are sending traps.

Flavio Miranda · ‎02-14-2019

Hi

That´s easy. Log in the Cisco Prime using cli. Use the shell commando to get on the OS command line.

Use tcpdump:

tcpdump -Z root -s0 -i eth0 port 162 | grep "Destination IP"

-If I helped you somehow, please, rate it as useful.-

View solution in original post

Flavio Miranda · ‎02-14-2019

Hi

That´s easy. Log in the Cisco Prime using cli. Use the shell commando to get on the OS command line.

Use tcpdump:

tcpdump -Z root -s0 -i eth0 port 162 | grep "Destination IP"

-If I helped you somehow, please, rate it as useful.-

ahmad.syed · ‎02-14-2019

While applying tcp dump, is it going to flood traffic if yes, how to stop this tcp dump or its automatically happens

ahmad.syed · ‎02-14-2019

Ia m not getting anything by applying ade # tcpdump ?
tcpdump: no suitable device found

Flavio Miranda · ‎02-14-2019

Type "sudo su" first.

You need to be super user .

-If I helped you somehow, please, rate it as useful.-