07-13-2015 08:41 PM - edited 07-05-2021 03:34 AM
Hi Guys,
I have a problem that I need some advice on please.....
On my WLC 5508 I see some clients that don't get a IP address. (See pic1)
These clients also have "DHPC_REQD status in their Policy Manager State. (See pic3)
As I said some clients.... Some work ok... (See pic1 / pic3)
My WLC is running version 7.6.130.0.
DHCP is coming from a Local windows DHCP server.
These devices do not have a static address.
Thanks Guys.
PIC1:
PIC2:
PIC3:
07-13-2015 11:13 PM
Under WLAN > Advanced tab, have you ticked "DHCP Address Assignment" option ? If not try to tick that and see.
HTH
Rasika
07-15-2015 02:52 PM
Hi Mate,
Thanks for the tip, but from what I read... this option will stop clients with a static address from working..
But what I'm seeing, is some clients on a AP have this problem and others on the same AP do not. ???
Regs Chris
07-15-2015 02:56 PM
07-15-2015 03:01 PM
07-29-2015 01:19 AM
Hi,
Please make sure the IP pool which you configured on the DHCP server has enough Address space.
& please mention your AP model as well so we may further check the root cause.
07-29-2015 03:38 PM
Thanks abwahid - yes, plenty of address space free in the DHCP scope being distributed.
We have a mix of AP's in the Infrastructure:
1131
1242
2602 (these are in use in the area causing concern)
02-17-2020 05:08 PM
01-10-2022 02:19 AM
I had the same issue and it turned out to be a DHCP enrollment certificate that had expired on the DHCP server. Users in specific SSIDs were not getting IP's and therefore showing 0.0.0.0 because they were using a different certificate that had expired.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: