SSH to router, then able to telnet to the next routers
I have setup my routers to allow only SSH (not telnet) access.
This is my setup
ip ssh time-out 120
ip ssh authentication-retries 3
line vty 0 4
login authentication LETmeIN
transport preferred ssh
transport input ssh
I am only able to SSH to any router, but once I login to the first router, I am then able to telnet (no SSH) to all other routers. Am I really using SSH protocol from the 1st router to the other routers OR did I misconfigure something?
The Ap lose ip static, we thought the Ap was not able to communicate with the WLC with assigned static IP address. When this happens the ap will fall back ti trying ti get a DHCP address.This occur randomly in platform controller 2504 with AP's model AIR-...
Dear Friends, I have to upgrade IOS in 5520, here my question was how to identify which FUS was installed in the WLC.GUI ----Software Version 188.8.131.52Emergency Image Version 184.108.40.206 -------sh sysinfo Product Version....................
Security has become one of the greatest concerns for every company alike. The industry is moving towards a fast paced and customer-oriented network infrastructure which automatically increases the vulnerabilities a network is exposed to. As the industry t...
We got some new Apple Macbook Air, when connected to wifi, we found the link speed was only 54Mbits, but other laptops like DELL or Panasonic were working fine, the link speed was at least 800 Mbits. we are using Cisco WLC 5504 and 2702I ap.and the funny ...