cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Popup Hotspot Using ISR 1000 with WiFi/LTE for Teleworkers and Micro Branchesr

Ask Me Anything – How to Enable Network Connectivity to Remote Workers
424
Views
0
Helpful
2
Replies
Highlighted
Participant

Support for dACL at WLC

Hi,

 

Is there any plan to support dACLs in the WLC?

As far as I know, SGACLs are supported, right? What's the difference between both if, in the end the SAGCLs implement filters based on destination ports, the IP addressing?

 

Regards.

Everyone's tags (3)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
VIP Mentor

Re: Support for dACL at WLC

On the traditional WLCs (85xx,55xx,35xx,25xx), you have to locally define those ACL in order to call as part of AAA override. This is mainly due to AireOS running on WLC as oppose to IOS/IOS-XE on switches.

 

Newer WLCs, (9800 series) is based on IOS-XE, so you should have same capability as any other 9000 series catalyst

 

HTH

Rasika

*** Pls rate all useful responses ***

 

View solution in original post

2 REPLIES 2
Highlighted
VIP Mentor

Re: Support for dACL at WLC

On the traditional WLCs (85xx,55xx,35xx,25xx), you have to locally define those ACL in order to call as part of AAA override. This is mainly due to AireOS running on WLC as oppose to IOS/IOS-XE on switches.

 

Newer WLCs, (9800 series) is based on IOS-XE, so you should have same capability as any other 9000 series catalyst

 

HTH

Rasika

*** Pls rate all useful responses ***

 

View solution in original post

Highlighted
Participant

Re: Support for dACL at WLC

Thank you Rasika.

I will check the capabilities of the new 9800 series.

CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey