cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

564
Views
0
Helpful
2
Replies
Beginner

Upgrading 1261n to Lightweight Image

Hey guys,

I am attempting to upgrade my 1261n's to lightweight but the upgrade tool (3.4) is telling me that it is not compatible with this model AP.  Is there an article or quick run down on what I need to do to upgrade these AP's?

Thanks,

Josh

2 REPLIES 2
Highlighted

Re: Upgrading 1261n to Lightweight Image

For the 1261 you don't need the upgrade tool.  All you need to do is load the image:

archive download-sw /f /o tftp:// < tftp server> / < image name >

HTH, Steve ------------------------------------------------------------------------------------------------ Please remember to rate useful posts, and mark questions as answered
Beginner

Re: Upgrading 1261n to Lightweight Image

Ended up being a known issue with the version of code I was running on my 5508 controller and the 1261 upgrade image.  Cisco is going to release a fix soon but moving me to 1262's for time being.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards