cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2738
Views
0
Helpful
1
Replies
Highlighted
Beginner

Urgent...ACS 5.2 change RADIUS Shared Secret

Getting the following error when trying to Authenticate.

Check whether the Shared Secrets on the AAA Client and ACS Server, match. Ensure  that the AAA Client and the network device, have no hardware problems or  problems with RADIUS compatibility. Also ensure that the network that connects  the device to the ACS, has no hardware problems

Where in the settings on the Cisco ACS 5.2 Appliance can you verify/change the shared secret?

Thanks, Tandrist

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Network ressources -> Network de

vices and AAA clients - > chose your switch/router in the list

There under radius, you can modify the shared secret. This is the same shared secret as you have to type on IOS when doing "radius-server host x.x.x.x key 0 THISISTHESHAREDSECRET"

Cheers,

Nicolas

View solution in original post

1 REPLY 1
Highlighted
Cisco Employee

Network ressources -> Network de

vices and AAA clients - > chose your switch/router in the list

There under radius, you can modify the shared secret. This is the same shared secret as you have to type on IOS when doing "radius-server host x.x.x.x key 0 THISISTHESHAREDSECRET"

Cheers,

Nicolas

View solution in original post

Content for Community-Ad