Any command if we can check near by ap of particular one ap so that I can change tx power manually from remotely
By these command if I found that near aps are also with same channel. Can I change the channel manually in running production
Ok i share some clients rssi value today.
If u change 1 6 11 respectively then ?
Because in 2.4 ghz they are showing channel 1
Team everything is working fine good snr good health but afte changing 5ghz band only guest user are facing issue.
Team still I m facing issue . I turn off 2.4 but user are seeing any yellow symbols with some ssid. Actually this is central wlc and aps are in flex connect. I check rssi value as well which is between -57 To- 67.
But there are 2 aps where users are facing more issue.plz help
I tried for one ap but now on user laptop they are seeing guest ssid with yellow sign .
Do you know what is the MAC address of this laptop? Post the complete output to the command "sh client details <MAC ADDRESS>".