VLAN depend on user credentials

[boris.majstorovic]

Hi all

We have plan to implement Cisco WiFi controller 2504 with APs 1602.

In the network there is the ACS server.

The goal is to authenticate users, and depend on users credentials AP/WLC will deploy appropriate VLAN.

For example

Guest user will be pushed in the VLAN100, corporate users will get VLAN 10...

Does it possible with equipment we have/will have:

ACS server

WLC: AIR-CT2504-50-K9

AP: AIR-CAP1602E-EK910

If not, what we need to implement our request?

Thanks

[Scott Fella]

You can look at dynamic vlan assignments using AAA override on the WLC. However, if your using WebAuth/captive portal for guest, you can't change their vlan. This is a layer 3 authentication so it requires the device to have an IP address prior to hitting the portal page. For other authentication methods, has to be 802.1, you can do that.

Sent from Cisco Technical Support iPhone App

[Scott Fella]

Here are some links

http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml

http://revolutionwifi.blogspot.com/2011/01/dynamic-vlan-assignment_31.html?m=1

Sent from Cisco Technical Support iPhone App

[boris.majstorovic]

Hi Scott

Thanks for quick reply.

One more question:

Does Virtual Wireless Controller (L-AIR-CTVM-5-K9) can provide dynamic vlan assignments and requested task?

Regards

[Scott Fella]

Well your a bit limited as the vWLC is FlexConnect only. You can centrally switch but it changes the design around.

Sent from Cisco Technical Support iPhone App

[Scott Fella]

Here is a link for that

http://www.cisco.com/en/US/docs/wireless/controller/7.2/configuration/guide/cg_flexconnect.html#wp1247954

Sent from Cisco Technical Support iPhone App