07-14-2010 01:09 PM - edited 07-03-2021 06:58 PM
Hi
Is it possible to set up some sort of authentication where the root bridge and non-root bridge only associate with the opposites MAC address?
07-14-2010 03:35 PM
Don't see the reason why, but yes. You can.
You also have the option of putting a strong password so no other bridge without the valid password can be part of the bridge. Y'see if, say, you've encoded the bridge's MAC in and you needed to replace, you'll have to reconfigure the MAC address.
07-14-2010 11:23 PM
Can you explain how i would associate the MAcs please?
Its not something I would do but it is something a customer has requested and i have no previous experience of this on Cisco wireless products!!!
Many thanks
07-15-2010 03:15 PM
Have a look at the link provided. There are ways of adding encryption and passwords to your point-to-point bridge. My recommendation is to go this way. It's alot quicker and easier to maintain.
Wireless Bridges Point-to-Point Link Configuration Example
I hope this will help.
Please don't forget to rate useful posts. Thanks.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide