09-22-2014 03:45 AM - edited 07-05-2021 01:34 AM
Hi,
I have WLC 2500 with firmware 7.4.121.0. I need to let clients to communicate to each other on same SSID (ping, arp and etc.). I know it’s unsafe, but is it possible and how to do it?
Thanks.
Solved! Go to Solution.
09-22-2014 04:42 AM
As long as you don't have P2P (peer to peer) blocking enabled on the WLAN advanced tab, the WLC isn't blocking it. By default, this is disabled, so make sure that hasn't changed. Check the FW on the user devices, just to see if they are blocking some services.
Here is a link to configuring P2P
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01001111.html
Scott
09-22-2014 04:42 AM
As long as you don't have P2P (peer to peer) blocking enabled on the WLAN advanced tab, the WLC isn't blocking it. By default, this is disabled, so make sure that hasn't changed. Check the FW on the user devices, just to see if they are blocking some services.
Here is a link to configuring P2P
http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-4/configuration/guides/consolidated/b_cg74_CONSOLIDATED/b_cg74_CONSOLIDATED_chapter_01001111.html
Scott
09-22-2014 05:00 AM
Thanks Scott seems it is working.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: