05-15-2019 10:36 AM - edited 07-05-2021 10:24 AM
I am receiving an increasing number of "This page can’t be displayed" messages when trying to access my system..
While the ping latency is <1ms I still suspect packet loss and timeouts..
The issue is observed with all browsers.. (win7p) but strangely enough I have a slightly better chance of success on my win10 package on the same switch/segment.
The WLC attached to a n7k is 5 miles away linked via ASE fiber..
The my local WLC, attached another n7k that I'm on is usually ok.
Has anyone else experienced something similar?
I don't have any issues with CLI other than typo's
05-15-2019 06:33 PM
I haven't seen such behavior David.
Which version you running on those 5520s ?
Rasika
05-17-2019 10:32 AM
Hi Rasika,
The 5520 and 5508 ha pairs are both on 8.5.140.0 code.
the 5520 be 7 miles out at the County Court house. While the 5508 ha pair is co-located with me.
the 2 n7k's are linked via the AT&t ASE system.
The issue occurs most frequently linking to the 5520's. but does occasionally occur with the 5508.
issue did exist on the old 8.3.143.0 code.
gui and cli access is ssh only.
Ping times are min 0, max 10, avg 1
system Statistics reports that the unit is not doing any work (99.58% idle)
don't ask for the 'home' page.. one will have to close the tab and reopen..
05-20-2019 01:38 AM
05-17-2019 06:48 AM
05-17-2019 10:42 AM
patoberli,
MY typoes.. not the wlc's.
No errors reported on the n7k port channels feeding the package.
06-20-2019 02:20 PM
Problem solved. Seems the HTTPS redirect function for guest users messes with admin access.
Turned off HTTPS redirect and all is well.
06-20-2019 02:50 PM
Can you please share a screenshot of how to disable this? I am having frustrations with WLC GUI and perhaps this will fix it too.
Thanks
06-20-2019 02:59 PM
06-20-2019 03:49 PM
thanks @David Ritter - if this works then I will have solved a mystery that has bugged me for a very long time :-)
06-20-2019 11:39 PM
06-21-2019 07:14 AM
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: