cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
243
Views
0
Helpful
4
Replies
Highlighted
Beginner

WLSE Error

I am running WLSE 2.11. I just installed a 12.42ag series WAP as a WDS device, assuming it would work without double checking. RRRRrrr, I never do that, but lately I've had more work then I can deal with. We've been using the 1231. Anyways, when I perform a discovery, WLSE reports the 1242ag series WAP as an unsupported device. Can I do anything about this or do I have to go back to the 1231?

4 REPLIES 4
Highlighted
Advocate

Check the Download | Wireless page. Cisco "occasionally" comes out with device support updates that may include your 1242.

If that's the case, that'll save you from having to do a firmware update/replacement on the WLSE, which I believe would be your only other option.

Good Luck

Scott

Highlighted
Beginner

The 1242 should be supported - ensure that your SNMP object identifier is 'iso' else the WLSE cannot manage the device. HTH

Highlighted
Collaborator

Using the SNMP query tool under Admin->Connectivity Tools, what do the sysObjectId for this AP come back with?

Highlighted
Beginner

You need to upgrade to 2.12 or 2.13 of the WLSE software to get support for the newer AP.

Content for Community-Ad