cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Cisco Community Designated VIP Class of 2020

222
Views
0
Helpful
6
Replies
Beginner

WLSE- No APs able to participate in Radio Scan

When I attempt to run a radio scan from my WLSE I get the following job run log. Does anyone have any ideas? All of my aps show up as registered with WDS and show up in the WLSE after being auto-discovered and inventoried...

Thanks

INFO: Executing the AP Radio Scan

INFO: Max Tx Power 100mW

INFO: Number of devices selected to participate in AP Scanning: 15

INFO: Device HPC-AP1 has 1 Radio Interface(s) that can participate in AP Radio Scanning

INFO: Device 10.36.200.110 has 1 Radio Interface(s) that can participate in AP Radio Scanning

INFO: Device 10.36.200.111 has 1 Radio Interface(s) that can participate in AP Radio Scanning

INFO: Device 10.36.200.112 has 1 Radio Interface(s) that can participate in AP Radio Scanning

INFO: Device 10.36.200.113 has 1 Radio Interface(s) that can participate in AP Radio Scanning

INFO: Device 10.36.200.114 has 1 Radio Interface(s) that can participate in AP Radio Scanning

INFO: Device HPC-AP2 has 1 Radio Interface(s) that can participate in AP Radio Scanning

INFO: Device HPC-AP3 has 1 Radio Interface(s) that can participate in AP Radio Scanning

INFO: Device HPC-AP4 has 1 Radio Interface(s) that can participate in AP Radio Scanning

INFO: Device HPC-AP5 has 1 Radio Interface(s) that can participate in AP Radio Scanning

INFO: Device HPC-AP6 has 1 Radio Interface(s) that can participate in AP Radio Scanning

INFO: Device HPC-AP7 has 1 Radio Interface(s) that can participate in AP Radio Scanning

INFO: Device 10.36.200.107 has 1 Radio Interface(s) that can participate in AP Radio Scanning

INFO: Device 10.36.200.108 has 1 Radio Interface(s) that can participate in AP Radio Scanning

INFO: Delivering AP Scanning request to Radio Manager, number of Radio Interface(s) = 14

INFO: Initializing radio scan for group 1 of 1

INFO: All interfaces temporarily configured to channel 6 or 48 and to actively scan other channels

INFO: Radio Scan measurement requests sent to all applicable interfaces

ERROR: Measurement request ACK timeout from WDS/10.36.200.50

ERROR: Removing interface 00-0f-24-f4-ba-b0 (10.36.200.100) from AP Radio Scan participation

ERROR: Removing interface 00-16-c7-db-86-20 (10.36.200.107) from AP Radio Scan participation

ERROR: Removing interface 00-16-c7-db-7f-50 (10.36.200.108) from AP Radio Scan participation

ERROR: Removing interface 00-16-c7-db-84-e0 (10.36.200.110) from AP Radio Scan participation

ERROR: Removing interface 00-0f-24-f1-76-c0 (10.36.200.101) from AP Radio Scan participation

ERROR: Removing interface 00-0f-90-48-6e-f0 (10.36.200.102) from AP Radio Scan participation

ERROR: Removing interface 00-0f-90-6d-31-40 (10.36.200.111) from AP Radio Scan participation

ERROR: Removing interface 00-0f-24-f4-bb-e0 (10.36.200.112) from AP Radio Scan participation

ERROR: Removing interface 00-0f-90-48-7a-f0 (10.36.200.103) from AP Radio Scan participation

ERROR: Removing interface 00-0f-90-4d-ef-c0 (10.36.200.104) from AP Radio Scan participation

ERROR: Removing interface 00-16-c7-db-84-c0 (10.36.200.113) from AP Radio Scan participation

ERROR: Removing interface 00-16-c7-db-85-90 (10.36.200.114) from AP Radio Scan participation

ERROR: Removing interface 00-0f-90-4a-9b-10 (10.36.200.105) from AP Radio Scan participation

ERROR: Removing interface 00-0f-90-48-86-80 (10.36.200.106) from AP Radio Scan participation

ERROR: No APs are available to particpate - ending AP Scan.

INFO: Temporary channel and power settings disabled

INFO: Radio Scan for scan group 1 Complete!

INFO: Completed the execution of AP Scanning task.

6 REPLIES 6
Collaborator

Re: WLSE- No APs able to participate in Radio Scan

on your master WDS AP, what do the CLI output show for the command "show wlccp wnm status"?.

Beginner

Re: WLSE- No APs able to participate in Radio Scan

WNM IP Address : 10.36.2.13 Status : SECURITY KEYS SETUP

Highlighted
Collaborator

Re: WLSE- No APs able to participate in Radio Scan

ERROR: Measurement request ACK timeout from WDS/10.36.200.50 --> Is this the correct ip add for your master WDS AP?

Beginner

Re: WLSE- No APs able to participate in Radio Scan

Not sure about the term "master wds" This is the address of the WDS that is responsible for that subnet. It is correct. Security Keys are set up.

Beginner

Re: WLSE- No APs able to participate in Radio Scan

Are all Ap's registred to the WDS?

Beginner

Re: WLSE- No APs able to participate in Radio Scan

Yes, WDS looks good. Very strange.

CreatePlease to create content
Content for Community-Ad

August's Community Spotlight Awards