03-13-2006 02:10 AM - edited 07-04-2021 11:46 AM
Hello,
I configured my WLSE to check if my AP (AP1231 and AP1131) are SNMP reachable once every ten minutes. I want to have an fault only when SNMP reachability is down for 3 consecutive polling cycles = if an AP is down for 20min
Actually, I get a fault as of the first time wlse polls the access point.
Anyone knows why wlse reacts like that ?
Thank you
Regards
03-17-2006 07:33 AM
This clearly looks like a configuration issue. I think the polling of the APs has not been set correctly. That is the reason you are getting unexpected results. Recheck the polling configuration.
03-21-2006 05:18 AM
Actually, I checked my configuration and I saw that during the upgrade from 2.12 to 2.13 the fault profiles I configured was not upgrade :
For example we don't have the same name for the SNMP reachable fault :
MO Names | Policy Names
wlse2.12 : AccessPoint | SNMPReachable
WLSE2.13 : IOSAccessPoint | SNMPReachable
It seems that I have to create a new profile...
Anyone has the same trouble when upgrading 2.12 to 2.13 ?
Thx
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide