cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
248
Views
5
Helpful
2
Replies
Highlighted
Beginner

workgroup-bridge client-vlan

Hi Everyone!

I have a problem with some autonomous 1532E AP with version code 15.3(3)JK in a root / non-root deployment.

 

I have a root ap and a wgb ap with a directly connected plc, since the plc is in a different vlan than the administration one I used the workgroup-bridge client-id command, the thing is that it only works with a wgb scenario, you know if I can do something similar with a root / non-root deployment?


Another thing is that when I set station-role workgroup-bridge, the ap loses more packets than when I set root / non-root. Does anyone have any idea why this happens or if it's just my perception?

 

BR!

 

2 REPLIES 2
Highlighted
VIP Mentor

Re: workgroup-bridge client-vlan

In root bridge/ non root bridge scenario, you can make it act as a trunk link. So you can pass any number of vlan as you wish. first part of this blog page give you simple root bridge/non-root bridge configs for couple of vlan.

https://mrncciew.com/2013/11/09/wireless-bridge-with-eap-fast/ 

 

Packet loss/re transmissions is quite common in WiFi. You need to see % of retry to see if it is too much or normal

 

HTH

Rasika

*** Pls rate all useful responses ***

Highlighted
Beginner

Re: workgroup-bridge client-vlan

Hi Rasika,

 

Yes, but the thing is I have a plc (or could be any endpoint) directly connected to de port of the Non root AP, and as far as I know, end points do not manage tagged traffic right? and the vlan I need to pass is not the native vlan, that's why I used the workgroup-bridge client-vlan command, to force all traffic to that vlan but I want to use non-root mode

 

do you see this normal?

 

Packets Input : 5538997 Packets Output : 606839
Bytes Input : 1730784040 Bytes Output : 648868910
Duplicates Rcvd : 35357 Data Retries : 747470
Decrypt Failed : 0 RTS Retries : 0
MIC Failed : 0 MIC Missing : 0
Packets Redirected: 0 Redirect Filtered: 0

 

 

 

BR!

CreatePlease to create content
Content for Community-Ad

Cisco COVID-19 Survey