Wireless - Small Business

Hi,I am having trouble with an pair of WAP200E's.The bridge between them stalls, found that one of the AP wireless LED don't show any activity.After powercycle the stalled AP, the bridge works again for a day or two.Have tried to replace the AP's sti...

Can  any one help me  if  we compare the 2 AP  Which one is better  .if we not consider the cluster function of ap541n.i got some info from blog the device  wap 4410n  got hanged .Thanks,Saroj

Currently I have an almost pure N environment, with the exception of 1 printer. My primary router is a WRVS400N v2, and the WAP 4410N is acting as a repeater.  On the WRVS400N I have the option og g/n Mixed (which is what I use), but this option is n...

I've posted a question revolving around what would seem to be a typical need / request from a SOHO setup, that is, to connect wireless clients wirelessly to be able to select and print to a wireless printer.To date, nobody has been able to help with ...

Hi,please advice  will the AP 541N  work  without cluster if i purchase one AP .Does  it support the bridge mode ?Thanks,Saroj

I am using a WRVS4400N as my primary router for a small office.  I get the following message repeated over and over in my logs.  This seems to happen for 2 or 3 days and then it will go away for about a week and then come back.  Does anyone know what...

Hello, I have three 1310 . updated with c1310-k9w7-tar.124-25d.JAmy topology is Wgroup--> repeater --> root with wireless clientsI want to bridge two vlans DATA/VOICE from the main network to a distant office.I was told that with the new IOS it possi...

Hi All,Just wanted to know if the small business WAP 4410N access point can work with a UC520 router? I presently use the 521 models but will want to use another model/type.

Hi, we purchased 8 WAP4410N access points to cover our entire school with wireless internet. 2 of those could not have access to a wired network accesspoint, so we wanted those to repeat the signal of 2 others. The ones who are to provide the signal ...

I need to configure a WAP4410N for use on a small, very simple business network.  There should be a corporate WLAN and a guest WLAN.  The corporate WLAN should allow anyone connectd to it to access resources on the domain.In front of the WAP is a cab...

I've been using a WAP4410N for about a year & a half in a small office & have had nothing but trouble with it lately!It seems to go down on a regular basis, at the least needing to be powered off & back on to get it to work & office users are frankly...

how to config wrv 210 wireless-G vpn router config.

I have 3 AP541Ns setup in a small environment.  The wireless clients use laptops to attach, via RDP, to a Microsoft Terminal Server.  They need the ability to walk, with laptop, from room to room, IE roaming wireless clients.  The issue is the client...

HiWe have an installation where we have a number of WAP200's running via POE from SF200-48P switches. The wireless range is not good. If we connect the WAP to a non POE port and use an external POE injector the range improves (maybe doubles).Can anyo...

How Can i Connect wireless router wrt45g2 wirelessly to access point wap4410n ??I have tried but its not able to get through with the settings. Please let me know the configurations