Wireless - Small Business - Page 174

Helpful support links - emulator, video tutorials, support pages +

Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Virtual Assistant- Discover support content and options for your gearSupport page index - Contains a ...

WAP200e IGMP?

Does anyone know of a wayto disable IGMP on the WAP 200e? Sniffer logs show both WAP 200e's that I have, are generating IGMP group membership queries. Then I get hundreds of hosts send IGMP membership reports.Any help would be appreciated.

WAP200E and the "Cisco Radius" server

I have six WAP200E which I had configured to authenticate using the Cisco Radius server in my office.All worked wonderfully. Then a few weeks ago, the radios stopped authenticating with the Radius server. The laptop computers could see the AP, reco...

Wireless Roaming & Max connection on WAP54GP

I have 3 WAP54GP Wireless APs in my office.I want to set up a wireless roaming between 3 WAPs with single SSID and PKS-TKIP encryption.Is it possible? Have any reference of this?I also want to know the max wireless connection of WAP54GP support.Many ...

AIR-AP1242AG bridge range issue

Hi All,I have a problem with a set of 4 AIR-AP1242AG APs that are configured to bridge data.In short, these are using the 5GHz radios to link 4 buildings.Point to multi-point.In test, with units spread in different rooms at the office, all units link...

Resolved! WAP 4400N

Hi guysI am TOTALLY incompetent in setting up wireless connections. I have a ADSL 512k connection via a Linksys WAG 300N modem router on the ground floor and it is linked by an ethernet cable to a WAP 4400N on the first floor.Recently the internet co...

Software for the wap4400n?

I can login to cisco wwebsite and get the latest firmware but I cannot find the software that goes with this wap. anybody know where to get it? Like the original cd so it can detectit on my network?

Interoperability of WAP200E and WAP54GP

I had 2 Linksys access points WAP54GPE connected in bridge mode. They worked properly for two years. One of the access points broke down and I replaced it with Cisco SB WAP200E (since WAP54GPE is EOL). So, now I'm trying to connect one WAP54GPE and ...

Will WLCS work with Cisco 1231G WAPs? Along with 1552s?

Have a partner with a client that has 1231Gs installed and wants to add a WLCS. Will that device control those WAPs? The partner is adding LAP1552LWs. Will they play together?Thanks - Art

what is part number number for 19" rack mount on 526 controller

I am looking for part number for the rack mount kit for a 526 conbtroller - nono is listed on the price sheet

Problems with WRVS4400N V1.1.03

Hi all,Just experiencing a problem with the WRVS4400N, which I see several others have also encountered, as posted on the Linksys support site.Wireless LAN users become unable to connect to anything through the router, i.e. no conectivity to either L...

Wired computer on WET200 cannot talk to wireless computer on WRV210

I have a computer (static IP: 192.168.1.12) wired to a WET200 bridge (firmware: 1.0.13).The WET200 (192.168.1.99) is connected wirelessly to a WRV210 router (firmware: 1.1.16).The router is the internet gateway (192.168.1.2).A computer connected wire...

WAP4410N and no connection after some days of uptime

Hullo,I have a couple of WAP4410N installed and configured with multiple SSID and multiple VLAN. I have troubles in two distinct areas, authentication with WPA2 Enterprise and latency/throughput if I use 802.11n.WPA2 Enterpriseafter some days of upti...

WAP 4410n Multiple SSIDs and Vlans

Hi,I am looking for more detailed explanations concerning the multiple SSIDs feature and Vlan with AP WAP4410nI am actually in charge to deploy a wireless network through a villa, there would be Pcs as also other wireless such as Lutron equipement (C...

need router buying advice please

I'm needing to get asap a router for my newtwork, but don't know what to do based on my needs and my current issues. I would so much appreciate any and all help and feedback. My dlink dgl-4300 last week it wouldn't work. It would just restart all the...

WRVS4400N bandwidth use info and TrendMicro question, firmware, ips

You know how when you log in you can click on the wan port and it shows send and receive bytes? How can I get it to say GB, MB, k, kb etc instead of just numbers? Also how can I get it to show monthly total? Do the numbers go to 0 if the router is re...

Wireless - Small Business

Forum Posts

Helpful support links - emulator, video tutorials, support pages +

WAP200e IGMP?

WAP200E and the "Cisco Radius" server

Wireless Roaming & Max connection on WAP54GP

AIR-AP1242AG bridge range issue

Resolved! WAP 4400N

Software for the wap4400n?

Interoperability of WAP200E and WAP54GP

Will WLCS work with Cisco 1231G WAPs? Along with 1552s?

what is part number number for 19" rack mount on 526 controller

Problems with WRVS4400N V1.1.03

Wired computer on WET200 cannot talk to wireless computer on WRV210

WAP4410N and no connection after some days of uptime

WAP 4410n Multiple SSIDs and Vlans

need router buying advice please

WRVS4400N bandwidth use info and TrendMicro question, firmware, ips

Meet and congratulate the February 2023 Spotlight Awardees!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

WPA3-OWE supported by 150AX?

CBW140AC-B not working out of box

Cisco Business 240AC Access Point

Cisco Business 240ac Access Point

240AC Access Point blinking red after config