Wireless - Small Business

I noticed Cisco product sales support staff is pushing 2125 WLAN controller as great WLAN solution. They got me into considering one as something what will work just fine.I strongly disagree, this product is extremely poor design and it is missing gi...

Just bought 2 of these (wish I had seen this thread before).  They shipped with the latest firmware already on them, so must be a very recent manufacture.  I am having the exact same problems as above.  It seems to be almost exactly 24 hours for me a...

Hi,I am using outdate version of firmware 1.2.8-ETSI, I only have problem with must power cycle sometimes, if we using with heavy transfer upload/download like torrent.my question, if i upgrade to latest firmware version 1.2.19 does it fix my problem...

Hey guys,I'm having a couple of issues with the 4410N. We are currently using the 4410N's as access points for our Blackberrys to use UMA.I currently have 4410N connected, I can connect WiFi through my blackberry and the UMA works. Now, I try to ping...

I recenty bought WAP4410N Wireless-N Access Point:Firmware: 2.0.0.5It has a feature I never saw in prior Linksys WAPs I bought in the past. That feature is "Wifi Protected Setup"! I have two questions about this feature:1) What is the purpose of the ...

When a wireless user accesses a Cisco wireless network controlled by the Cisco Wireless Express Mobility WLC526 controller and the controller is configured to use web authentication, the wireless user first gets a certificate warning page as seen bel...

My customer would like to upload a customized login page to the Cisco Wireless Express Mobility WLC526 controller for web authentication purposes.  The documentation tells you how to upload the "authentication bundle," but it does not give the specs ...

Hello,  Has anybody else come across this issue ?  I cannot get an IP address from my DHCP server when I am connected to a WAP 200 that is operating as a repeater. I have worked around this by turning off the WPA encryption, so I assume that means my...

I have two WAP4410N's running the 2.0.0.5 firmware. One acting as an Access Point and the other as an WDS repeater. The one configured as an AP stops responding every 20-30 minutes and has to be power cycled. All the indicator lights are ok but doesn...

Hello,i noticed that in vista that when you have an open wireless connection it prompts you for a code even though you dont have one set. There is a way around it but now its an extra step. there a very little options in the web interface to configur...

Hi EngineersI having difficulties in configuring the PPTP, and IPSEC Vpn.1. when configuring the PPTP using the Quick VPN Client, It always go to this way, Connecting>Activating Policy>verifying Network-from this state takes some time, and finally te...

Dear all;I have problem of "Authentication failed" between AP 1252 and IP phone cisco 7920 (I tried all encryption types and no encryption and still have the same problem)I know that 7920 is not supported with 1250 AP by cisco ,But somehow there ares...

I have three WAP-200e access points each equipped with a high gain antenna. One of them is located on the roof of one of our main buildings and is connected direct to our LAN. The other two are mounted on remote buildings about 150yards away. I have ...

A partner is trying to find this device and cannot locate one in distribution. Is it still a good number? Is there another N-class device that can be substituted?Thanks -Art

I am a sys admin and have set up quite a few WAPs in my past, this one has me stumped. Setup is as follows:Motorola Surfboard Cable Modem connected to Grandstream HT-502 (VOIP phone service) router w\DHCP active. That is connected to an 8 port switch...