cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1002
Views
3
Helpful
4
Replies

Cisco Small Business 4410N and Apple

Teamsoftware
Level 1
Level 1

Hello,

I have a problem in connetion between the access point and Apple iPhone and iPad.

Firmware version 2.0.6.1

Try with WPA-Personal (both AES and TKIP) and WPA2-Personal encryption too.

Appliance works in Access Point mode.

Anybody has had the problem?!

Thankyou very much!

Adriano

4 Replies 4

jeffrrod
Level 4
Level 4

Dear Adriano,

Thank you for reaching the Small Business Support Community.

Besides checking on the firewall settings on the Apple devices and try with firewall off, I could only think of a factory reset and re-configuration.  I am not aware of related known issues.

Please give that a try and let me know, I'll be looking forward to hear from you.

Kind regards,

Jeffrey Rodriguez S. .:|:.:|:.
Cisco Customer Support Engineer

*Please rate the Post so other will know when an answer has been found.

Jeffrey Rodriguez S. .:|:.:|:. Cisco Customer Support Engineer *Please rate the Post so other will know when an answer has been found.