WAP 200 Wireless Acces Point Support for Multiple SSID and VLAN

[gmkefaster]

I have the above access points in our network WAP200 Wireless-G Access Point- We have two VLANs in place, one for guest the other one for the corporate network.

Is it possible to have SSID one(corporate network) be in one VLAN and the other SSID 2 in the other one(WiFi). the two VLAN's are in different subnets altogether, as such they shouldnt communicate with each other.

and btw does the above device support DHCP

If so what are the configurations that i should do?

thank you

[Milan Milanov]

Hello,

Please refer to the WAP200 Administration Guide in order to understand how to configure the WAP with two VLANs (one per each SSID): http://www.cisco.com/c/dam/en/us/td/docs/wireless/access_point/csbap/wap200/administration/guide/WAP200_V10_UG_Rev_B_web.pdf (page 26).

Please also be advised that the WAP200 can't act as a DHCP server.

Kind regards,

Milan Milanov