cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
723
Views
0
Helpful
1
Replies

WAp321 work only for a few minutes after reboot

Roger Richards
Beginner
Beginner

this error below shows up on my log many times

mDNSPlatformSendUDP got error 126 (Cannot assign requested address) sending packet to FF02:0000:0000:0000:0000:0000:0000:00FB on interface 10.20.30.4/brtrunk/8,size of to is 16,socketsize is 2

1 Reply 1

Eric Moyers
Rising star
Rising star

Not knowing what you have tried other than rebooting, I would do the following:

Update the firmware. If you are on the latest then I would at least reflash it. (To me this sounds like something got corrupted)

If that doesn't help then I would do some Packet Captures. We have tools built into the GUI that can help with that.

Also you are more than welcome to call in and open a case with an engineer to help troubleshoot this.

http://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html

Eric Moyers
.:|:.:|:. CISCO | Cisco Presales Technical Support | Wireless Subject Matter Expert

Please rate helpful Posts and Let others know when your Question has been answered.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: