cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1361
Views
0
Helpful
1
Replies

WAP4410N Duplicate IP's when Repeating

orthotechnology
Level 1
Level 1

First here is our network breakdown

8 Windows 2008 Servers - uneffected

5 Windows 2003 Servers - effected with dupe IP's

We have AP - A, B and C all configured static and outside of our DHCP scope

A - 104.240

B - 104.241

C - 104.242

WAP A is setup to allow the MAC's of A and B to repeat its signal

The issue starts about 1-2 minutes after I set B and C to client/repeater and select A in site survey then save the settings.  Obviously its weird that only our 2003 servers are getting this error

The system detected an address conflict for IP address 192.168.105.201 with the system having network hardware address *MAC ADDRESS OF ROUTER A*. Network operations on this system may be disrupted as a result.

Any thoughts?

1 Reply 1

ricardo__
Level 1
Level 1

I have the same problem, when i put my two WAP4410N to work in client/repeater mode, all the host in the network starts the advisory alert that the ip is used by an other host.

Any solution?