cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1798
Views
0
Helpful
2
Replies

1130 AP encryption ciphers

iholdings
Level 1
Level 1

I have the following configured on my 1130 radios: dot11adio0 and dot11radio1

interface Dot11Radio0

no ip address

no ip route-cache

!

encryption mode ciphers aes-ccm

!

ssid bld_ap

when I attempt to add the key-management to the dot11 ssid:

dot11 ssid bld_ap

vlan 1

authentication open

guest-mode

wpa-psk ascii 7 095B1F1B4A0944564F

this error pops up:

BL_1130AG(config-ssid)#authentication key-management wpa

Dot11Radio1 Error: Encryption mode cipher is not configured

but looking at the radio interfaces, the ciphers are enabled.

am I missing something?

2 Replies 2

amritpatek
Level 6
Level 6

Configure 'Encryption Modes' option as 'Ciphers' under Configure --> Templates --> Security --> WEP 802.11b/g/a.

That path looks like SDM or CP. I'm configuring using web interface or CLI on the 1130AG-AP - and I can't find that option.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card