1142 Lightweight to Autonomous

[jeffrey-young]

Hello all,

I am trying to convert an 1142 from lightweight to autonomous.  I've found this post:

https://supportforums.cisco.com/thread/2055997

However the following command is not available via the CLI: archive download-sw /overwrite tftp://

Any thoughts?

Thank you,

Jeff

[Stephen Rodriguez]

Jeff,

     take a look at the document below.  it walks you through the process.

http://www.cisco.com/en/US/partner/docs/wireless/access_point/conversion/lwapp/upgrade/guide/lwapnote.html#wp160918

HTH,

Steve

----------------------------------------------------------------------------------------------------------

Please remember to rate helpful posts or to mark the question as answered so that it can be found later.

[Leo Laohoo]

Using a TFTP Server to Return to a Previous Release

[mannu.sha@gmail.com]

Hello

I am using Product/Model Number: AIR-LAP1242AG-N-K9  with following IOS information:

BOOT path-list:      flash:/c1240-rcvk9w8-mx/c1240-rcvk9w8-mx

Config file:         flash:/config.txt

Private Config file: flash:/private-config

Enable Break:        no

Manual Boot:         no

Enable IOS Break:    no

HELPER path-list:   

NVRAM/Config file

      buffer size:   32768

      Mode Button:    on

Now I want to convert this to Autonomous mode but command

"debug capwap console cli

or

debug lwapp console cli"

  are not working. Could you please confirm the command for converting LWAP to Autonomous AP for the mentioned IOS

Regards,

Manish Sharma

[Leo Laohoo]

Hi Manish,

Click on the link posted above.