03-02-2009 03:25 PM - edited 07-03-2021 05:15 PM
I have a 1310 WBG that is connected to the infrastrure pointed at a 1240 AP. The problem that I am seeing is a client (camera) works once the camera is powered up. It gets an IP and then it is unaccessible from the network. I can login to the bridge and ping the device. What could be causing the device not to be accessible from the network?
Thanks,
TJ
03-02-2009 05:32 PM
What's the make and model of the camera?
03-02-2009 06:03 PM
The camera is a Pelco Spectra IV.
03-02-2009 07:03 PM
Does your camera tell you which AP you're currently assocated to? Can your camera also tell you if you're authenticated?
03-03-2009 07:45 AM
The only thing I can do is ping the camera from the bridge. I cannot ping the camera from the other side of the bridge. The bridge is associated with the correct AP and I can login into the bridge.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide