10-08-2013 12:29 AM - edited 07-04-2021 01:01 AM
Hi All,
I have a 1552eu AP which doesnt have a possibility to be connected to LAN/WAN connection. Can we convert it to autonomous and use it in Bridge mode or any other option to provide network access to clients.
WLC <--FlexConnect-> 1552 AP <--No LAN/WAN--> 1552 <--> Clients.
-Thanks
10-08-2013 04:28 AM
I don't think it would be supported as there isn't any documentation really for that. You can convert it to autonomous and try to set that up as a WGB if you want, but your best bet is really to setup one of your other AP's as a Mesh RAP and then have the 1552 mesh to that AP.
Sent from Cisco Technical Support iPhone App
10-08-2013 04:37 AM
But heere the WLC is a 7500, which I think does not supports MESH. Does it?
10-08-2013 05:04 AM
The 7500 only support FlexConnect.... so why did you purchase the 1552? You might as well just get a 2602/3602 autonomous and use that as a WGB. Like I said, you can try to load the autonomous code on the 1552 and configure that as a WGB. I don't know if you will have that option of not, because that would be a very exensive WGB.
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide