08-27-2015 02:06 AM - edited 07-05-2021 03:50 AM
Hi,
I want to clear something out, I'm proposing a AIR-CAP1702I-E-K9. I'll be using the WS-C2960X-24PD-L switch which can give 15.4 Watts per port.
It says in 1702 AP datasheet(http://www.cisco.com/c/en/us/products/collateral/wireless/aironet-1700-series/datasheet-c78-732347.html) that the input power is 15W but under the power options it gives me 802.3at PoE+ or Enhanced PoE , not 802.3af.
Will this switch draw enough power for the AP? it should as the AP requires 15W, but the power options is saying otherwise.
interestingly in this link http://www.cisco.com/c/en/us/products/wireless/buyers-guide.html#indoorac it says under power that it will support 802.3af which supports 15.4
Which one is right ?
Thanks
Solved! Go to Solution.
08-27-2015 03:57 AM
2960X can support up to 30w PoE. It all depends on the "power budget" of the switch.
08-27-2015 03:57 AM
2960X can support up to 30w PoE. It all depends on the "power budget" of the switch.
08-27-2015 04:25 AM
Power Budget is 370W, meaning it would support 30 watts on 12 ports max.
Thanks
08-28-2015 12:02 AM
Power Budget is 370W, meaning it would support 30 watts on 12 ports max.
That's correct.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: