1811W Router wi fi config

[mahesh18]

                   Hi all,

I have 1811w router and i need to config that for home wi fi.

IT has 2 interfaces

Router#sh ip int brief
Interface                  IP-Address      OK? Method Status                Prot
ocol
Async1                     unassigned      YES unset  down                  down

Dot11Radio0                unassigned      YES unset  up                    up

Dot11Radio1                unassigned      YES unset  ad

Need to know what should i config on Do1 radio for wi fi config?

Can i use only 1 interface or i need to use both?

Thanks

MAhesh

[Stephen Rodriguez · Accepted solution]

Radio 0 is the 2.4GHz, and Radio 1 is the 5GHz.

you can configure only one if you want, or you can have the same SSID on both.  you could even configure one SSID on R0, and a different one on R1 if you want to.

Any of the AP configuration guides, or walk throughs should work well to get you up and running.

http://www.cisco.com/en/US/docs/wireless/access_point/12.3_7_JA/configuration/guide/s37ssid.html

HTH,
Steve

-----------------------------------------
Please remember to rate useful posts, and mark questions as answered

[mahesh18]

Hi Stephen,

Many thanks i am new to wi fi still lot to learn from this forum.

Mahesh