cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2412
Views
0
Helpful
5
Replies
prasath_tt
Beginner

2504 wireless controller - turn off / disable options during off peak hours

       I'm configuring a 2504 wireless controller with # of 1142 APs, wondering is there an option to turn off the WLC/ APs during after ofice hours? such as turn off power/RF options etc

3 ACCEPTED SOLUTIONS

Accepted Solutions
Scott Fella
Hall of Fame Guru

There is not an option from the wlc. You can maybe use a pdu to power off the wlc on a schedule. I know some switches support shutting PoE ports if you want.

Switches that support Energywise

Sent from Cisco Technical Support iPad App

-Scott
*** Please rate helpful posts ***

View solution in original post

Amjad Abdullah
Engager

no option on wlc. you can achieve this however if you have WCS or NCS.

Sent from Cisco Technical Support iPad App

Rating useful replies is more useful than saying "Thank you"

View solution in original post

If you have WCS / NCS, you could push a template to the controllers. Not sure about the HP swicthes, I have limited experience with those. On Cisco you can you do a time ACL.

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

View solution in original post

5 REPLIES 5
Scott Fella
Hall of Fame Guru

There is not an option from the wlc. You can maybe use a pdu to power off the wlc on a schedule. I know some switches support shutting PoE ports if you want.

Switches that support Energywise

Sent from Cisco Technical Support iPad App

-Scott
*** Please rate helpful posts ***

View solution in original post

Amjad Abdullah
Engager

no option on wlc. you can achieve this however if you have WCS or NCS.

Sent from Cisco Technical Support iPad App

Rating useful replies is more useful than saying "Thank you"

View solution in original post

What about a "time" ACL on your swicths to do a SHUT to your APs.

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

I'm not sure about that George.. we have a hp5412zl where the Aps are connected..

is it possible to shut off the ports for a period of time?

If you have WCS / NCS, you could push a template to the controllers. Not sure about the HP swicthes, I have limited experience with those. On Cisco you can you do a time ACL.

"Satisfaction does not come from knowing the solution, it comes from knowing why." - Rosalind Franklin
___________________________________________________________

View solution in original post

Content for Community-Ad