Showing results for 
Search instead for 
Did you mean: 

2504 with Seperate Internet Connection

Alex Li
Level 1
Level 1

Hello All,

I have a 2504 WLC connected to my internal LAN and internal SSID's working great.

What I would like to do is setup a guest SSID and have it use a physicially seperate interenet connection (DSL) I am using a PIX 501

for my DSL and that works great, but then I connect the PIX to a port on the WLC and assisgn a Guest SSID to it, I am unable to get an IP.

1. Can this setup work ?

2. Currently my management interface is untagged, can I have multiple untagged interfaces ?

3. Should I use the WLC as a DHCP server or the PIX ?

Any help would be greatly appreciated.


1 Accepted Solution

Accepted Solutions

Scott Fella
Hall of Fame
Hall of Fame

Why not connect the dsl to the same switch and use vlans. That might be easier to get working. You don't have to have a layer 3 interface. You would just create a vlan on the switch just for the dsl and the one port off the WLC.

Sent from Cisco Technical Support iPhone App

*** Please rate helpful posts ***

View solution in original post