05-29-2015 06:10 AM - edited 07-05-2021 03:19 AM
Hello,
I want to know if it's possible to use a Cisco Switch 3650 as a Guest anchor to tunneled Guest Clients to a DMZ ?
If yes, what are the 3650 capabilities vs 2504 capabilities (tunnels, bandwidth, users supported) ?
Thanks.
Solved! Go to Solution.
05-29-2015 06:48 AM
Per the release notes of IOS XE 3.7, using a 3850 or 3650 as a guest anchor is not supported.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3e/release_notes/rn-3dot7e-3850.html#pgfId-1003081
HTH,
Steve
06-10-2015 01:40 AM
Hi,
Please check the below post as well for your concern
https://supportforums.cisco.com/discussion/11392556/ask-experts-wired-guest-access
05-29-2015 06:48 AM
Per the release notes of IOS XE 3.7, using a 3850 or 3650 as a guest anchor is not supported.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3e/release_notes/rn-3dot7e-3850.html#pgfId-1003081
HTH,
Steve
05-29-2015 07:12 AM
Ok thanks, so the 3750G is the only switch able to act as a Guest Anchor, is it right?
Thank you.
06-10-2015 01:40 AM
Hi,
Please check the below post as well for your concern
https://supportforums.cisco.com/discussion/11392556/ask-experts-wired-guest-access
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: