5500 ap lic upgrade problem

[john smith]

hello friends,

i am facing a problem to install a ap upgrade lic file on controller 5500

i am getting the follwoing error

% Error: License file transfer failed - Error from server: File not found

i have confusion here that

when i configure this comand from GUI

tftp://172.32.45.22/cmm/standard.lic

what i sould use for /cmm/  ????

let say i have lic. file is on desktop of tftp server computer

and i say in this comand

tftp://10.12.70.35/??/license file .lic

??

thanks

[john smith]

please some one reply for this

its urgent for me

what i should use for /cmm/ ??

thanks

[Scott Fella]

It depends on where your tftp root folder is. If you place the lic file in the tftp root, you do not need to specify a directory. Configure your tftp server correctly.

Ex.

tftp://10.10.20.10/license.lic

Or in your case:

tftp://172.32.45.22/license.lic

Sent from Cisco Technical Support iPhone App

[john smith]

thanks for you reply

i really appreciate your support

but what are the meanings of this word in comand

tftp://172.32.45.22/cmm/standard.lic

/cmm/     ????

but i would type if i have a lic. file on my desktop?

thanks

[Scott Fella]

That a directory named cmm. So the license file is placed in the root folder/cmm

Sent from Cisco Technical Support iPhone App

[Scott Fella · Accepted solution]

Let me clarify... If your license file is on your desktop, then you would configure or set your root tftp folder to your desktop. Then all you have to do is:

tftp://172.32.45.22/license.lic

Assuming your tftp server ip is 172.32.45.22

Sent from Cisco Technical Support iPhone App

[john smith]

thank you Fella for your support

actually the best practice is to just keep the lic. file in tftp server's directory folder

and use the same comand from GUI

tftp://172.32.45.22/license.lic

thanks