We have a Cisco 5508 WLC running as a centralised WLC managing around 100 APs registered in flexconnect mode. the current permanent license on this WLC is 105.
There is another 5508 WLC running on evaluation license which was intended to act as secondary WLC for these 100 APs. Due to some reason the permanent license is not there in this second WLC
Can this second WLC be used as a HA pair so that AP failover can happen soon and also no permanent license needs to be purchased. Is there any thing in terms of license/hardware to consider when bringing this setup?
Can this second WLC be used as a HA pair so that AP failover can happen soon and also no permanent license needs to be purchased.
If you are talking about HA SSO, then the secondary WLC must have a minimum of 50 AP license. This is the "fee" for enabling this feature. 5508 End-of-Sale date was 04 May 2018 (ANNOUNCEMENT). This means no vendor can sell adder license for the 5508.
It’s been about two and half years, since the launch of next generation Cisco Catalyst 9800 Wireless LAN Controllers that has the most deployment flexibility and runs the modular, scalable, highly reliable, open and programmable operating system, I...
Hi All, I have made this video for Cisco Pitch the Future Contest in Malaysia which talks about Wi-Fi 6 and EWC Demo. Please feel free to view the video below and please support me for this contest by giving the video a like as the Contest will end o...
On the Cisco Catalyst 9800 Series WLC, enabling/disabling the remote LAN (RLAN) ports on APs requires going into the configuration for each AP and manually enabling/disabling the ports. However, as the number of APs that need to have their RLAN...
It’s been a long road for our AireOS wireless controllers. In fact these products have been around Cisco in some form since 2005. As you may have heard, Cisco made the decision to End-of-Sale (EOS) these products last month.
That means that these AireOS ...