cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2068
Views
0
Helpful
7
Replies

8.10.105 and WPA3

timgrantham
Beginner
Beginner

Is anybody else using the MobilityExpress 8.10.105 with WPA3 enabled?

 

I'm getting an annoying thing happen where clients are booted every 24 hours and take an age to reconnect, which when you have AppleTVs streaming can be annoying as they drop and then report incorrect password for ages when trying to connect back...same happens with other devices on connecting via WPA3..

 

WPA2 is fine - if I disable WPA3 then the devices will remain connected and not drop.

 

I understand that this is an initial release, and could have "caveats" in the build OS, I'm currently testing at home as my client is wanting to go WPA3 ASAP due to security concerns and the nature of their business, so I'm the guinea pig...

 

This is more of a case to find out if anybody else is experiencing this, or am I the only one??

7 Replies 7

AlexW22
Beginner
Beginner

I guess I am experiencing something similar. When I enable WPA3 on MobilityExpress 8.10.151 my apple devices (iPhone/iPad) don't connect to the AP at all. Because of this I also ended up using WPA2. Is there any additional config required to set up WPA3? I am using an 3800 AP.

Here is a matrix that will show what is supported

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/feature-matrix/ap-feature-matrix.html#_Toc64463741
-Scott
*** Please rate helpful posts ***