802.11a/n/ac Radios Down

[scott.samra]

Hello,

I recently installed a 5508 controller with 3602i APs...I appears that my a/n radios are present, but are showing down.  I checked the network settings under "Wireless" / "802.11a/n/ac" /Network and they appear to be enabled.  How would I enable these?

Thank you,

Scott

[scott.samra]

Thanks guys, this is definitely my issue.  Much appreciated.

[scott.samra]

One more question...if I am deplying centralized wireless with the contollers based in US, should I be ordering all US APs?

[Stephen Rodriguez]

If all the AP are going to be in the US then you should be ordering only -A regulatory domain AP

HTH,
Steve

------------------------------------------------------------------------------------------------
Please remember to rate useful posts, and mark questions as answered

[Sandeep Choudhary]

Yes, if you only deploying in US then u need only for US means -A- regulatery domain on AP.

Reagrds