cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1063
Views
0
Helpful
3
Replies

802.11a/n interface in AP1141n

sayrmatics
Level 1
Level 1

Happy New Year everyone.

Just added some 1141n APs to our already running wireless infrastructure of all 1142n APs and on the WCS, I can see that the 1141s haven't got  802.11a interfaces unlike the 1142s. Is this a feature of the hardware? Has it been left to the admin to enable the interface if required and how?

Thanks.

3 Replies 3

Madhuri C
Cisco Employee
Cisco Employee

Hi,

Happy new year to you too.

What you are seeing is an expected behavior. 1141 hardware doesn't support 802.11a radio at all and it supports only g/n while 1142s have a/g/n

You can see the same from data seets :

Cisco Aironet 1140 Series Access Point

• AIR-LAP1142N-x-K9 - Dual-band Controller-based 802.11a/g/n

• AIR-LAP1141N-x-K9 - Single-band Controller-based 802.11g/n

• AIR-AP1142N-x-K9 - Dual-band Standalone 802.11a/g/n

• AIR-AP1141N-x-K9 - Single-band Standalone 802.11g/n


Regards,
Madhuri

Leo Laohoo
Hall of Fame
Hall of Fame

In reponse to Madhuri's post.  The 1141 only has a 802.11b/g radio, hence the "1" in the part/model number.

thanks guys

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: