cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
530
Views
0
Helpful
4
Replies

802.11ac Wireless Bridging

andrewdours
Level 1
Level 1

Anybody bridging with 802.11ac?  What would I need to make this happen?

4 Replies 4

Sandeep Choudhary
VIP Alumni
VIP Alumni

HI,

Dont forget to check:

To get the higher rates you have to use WPA2/AES or Open/No Auth, and WMM has to be allowed.

Regards

Dont forget to rate helpful posts

Sounds like you've done this.  What I was really asking for was more of a high level.  Does Cisco have a specific model of AP that can perform 802.11ac wireless bridging?  Can it run autonomous or does it require a controller?  What types of antennas are available?

Thanks,

High level :)

I never used these product but still check these:

Did not find any official document abouts products for 802.11ac bridging ...

http://www.engadget.com/2012/06/26/cisco-rolls-its-first-linksys-802-11ac-wifi-router-and-bridge/

http://www.smallnetbuilder.com/wireless/wireless-news/31802-cisco-unveils-its-draft-80211ac-router-and-bridge

 

you better ask to nearest cisco supplier about this, they can help you more in this matter.

 

Hope this helps.

Regards

Dont forget to rate helpful posts

kaaftab
Level 4
Level 4

Here is the comparision sheet for all AP

http://www.cisco.com/c/en/us/products/wireless/buyers-guide.html#indoor

and here is good link for mesh deployment and every thing is explained

http://www.cisco.com/c/en/us/support/docs/wireless-mobility/wireless-mesh/111451-indoor-mesh-deploy-guide-00.html

Review Cisco Networking for a $25 gift card