cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
842
Views
0
Helpful
3
Replies

802.11b/g interface reset periodically on same AP

CSCO11177789
Level 1
Level 1

Hi;

We use wlc4404 with 1242ag AP series. 

Only on two AP which located remote site, (we have dedicated 20 mbit metro ethernet line between main site and remote site) periodically we get these logs. meanwhile clients is reconnect of course

 

'802.11b/g' interface of AP 'IST_TEM_3' associated to controller 'WLC4404-1 (10.50.1.4)' is down. Reason: Radio channel set.

'802.11b/g' interface of AP 'IST_TEM_3' associated to controller 'WLC4404-1 (10.50.1.4)' is up. Reason: Radio channel set.

'802.11b/g' interface of AP 'IST_TEM_3' associated to controller 'WLC4404-1 (10.50.1.4)' is down. Reason: Rogue Location Discovery Protocol start.

'802.11b/g' interface of AP 'IST_TEM_3' associated to controller 'WLC4404-1 (10.50.1.4)' is up. Reason: Rogue Location Discovery Protocol stop.

 

what do you suggest to solve this issue ?

 

Best regards

 

Umut 

 

 

3 Replies 3

Leo Laohoo
Hall of Fame
Hall of Fame

What version is your WLC running on?

7.0.250.0

 

AP ios : 12.4(23c)JA8

Any answers?

Review Cisco Networking for a $25 gift card