cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2979
Views
5
Helpful
2
Replies

802.11r FT with 802.1x

charlietweet
Beginner
Beginner

We are trying to test a new feature in Cisco's new controller code 8.0.110.0.

Per Cisco's documentation, the feature can be enabled so that one WLAN (SSID) allows both FT clients and 802.1x (non-FT) clients.

We have tested multiple clients with this feature and none of them can even associate to the WLAN.  My first question relates to the specific configuration (see attached, but disregard the PSK checkbox).  If we want to allow all 802.1x clients on the WLAN regardless of their FT capabilities, please specify all the checkboxes that should be enabled.?

 

 

2 Replies 2

Rasika Nayanajith
VIP Mentor VIP Mentor
VIP Mentor

Hi

Settings should be like this for 802.1X and PSK SSID.

When you enable 802.11r depending on the client it may able to join the SSID (even client does not support 802.11r FT) here is the list when 8.0 code released in 6 months back.

Refer this post for more detail

https://supportforums.cisco.com/discussion/12314591/8021r-and-fast-roaming

HTH

Rasika

*** Pls rate all useful responses ***

We are having trouble getting Laptops and PC Wireless clients to connect with those settings.  I read through the discussion you sent...:

https://supportforums.cisco.com/discussion/12314591/8021r-and-fast-roaming

 

...the key statement seems to be:

"You need to remember that 802.11r is not supported by all clients (mainly supported by Apple iOS clients only). "

 

That entire discussion forum is educational though, so thanks for sending it.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: