Hi guys,
We have a customer with 2600, 2700, 2800 APs and we're migrating a customer to 9115, 9120 and 9130.
They have a pair of 5520 running 8.10.142
The customer's switch ports are configured with dot1x and mab authentication. The ports are configured so if a equipment connects to the switch port, the network will first try a authenticate it with dot1x but if that fails, it will try MAB.
All the APs are ok with this except the 9130. The 9130 seems to reset the wired interface before attempting the MAB authentication.
Anyone else with this issue?
Does anyone knows if the 9130 requires more than
Cheers,
Vasco
