01-09-2023 09:20 PM
I am experiencing a batch of 9130AXI AP's not joining the local 3504 WLC. Option 43 is good AP is receiving a IP.
Solved! Go to Solution.
01-09-2023 11:03 PM - edited 02-01-2023 09:25 PM
What is the Date of Manufacture of the APs, are they after September 2022?
If they are, upgrade the WLC to 8.10.18X.0 (and later).
01-09-2023 11:03 PM - edited 02-01-2023 09:25 PM
What is the Date of Manufacture of the APs, are they after September 2022?
If they are, upgrade the WLC to 8.10.18X.0 (and later).
01-09-2023 11:39 PM
Thanks Leo. These AP's are VID 3.
I connected couple of new AP's (9130AXI) to my WLC had on IOS V 8.10.151 and noticed the fn72424 issue. then upgraded to IOS 8.10.181. Those two new AP's connected to the WLC during the upgrade got registered after the upgrade with the WLC without an issue.
I have few more 9130AXI's need to connect and they are not registering with the WLC for some reason.
01-09-2023 11:47 PM
>...I have few more 9130AXI's need to connect and they are not registering with the WLC for some reason.
- Check controller logs when they try to join and post the ap boot process (too)
M.
01-10-2023 12:35 AM
Connect a console cable to the AP, reboot the AP and post the boot-up process.
01-10-2023 12:42 AM
I restarted the port connected to the switch- nothing changed.
01-09-2023 11:15 PM
- FYI : https://www.cisco.com/c/en/us/support/docs/field-notices/724/fn72424.html
M.
01-09-2023 11:59 PM
can you share the console output from any of those C9130s not joining please?
02-01-2023 08:50 PM
Thanks Leo. Date changed nd upgraded the WLC to 8.10.183.0. Fixed!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide