9800WLCs copy config from lab

[Saiganesh]

Hello there

   We are trying to migrate WLCs 9800s ACS TACACS+ to Cisco ISE. 

We were successful in migrating in the lab, but we have issues while on the actual production, is there a method to copy the lab configurations to the actual production. in simple word is it possible to copy the wlc config to another wlc.

[marce1000 · Accepted solution]

 Ref : https://www.cisco.com/c/en/us/products/collateral/wireless/catalyst-9800-series-wireless-controllers/guide-c07-743627.html

                                Take note of the paragraph : Configuration file management

 M.

[Saiganesh]

Thank you this was very useful