we have a setup where there is two 1552s connected to a centralized controller. The APs are in Flex+Bridge mode. One is RAP and the second one is MAP.
Now the mesh AP is broken and the replacement product 1560-series does not support Flex+Bridge - not at least in version 8.5. What happens if the RAP is in Flex+Bridge and we connect the mesh in Bridge mode. Does it work? Does the client traffic drop in the local network after the RAP?
Just get the 1570 which can do Flex+Bridge on code 8.5 and solves your problem :-).
Also it looks like code 8.8 may support Flex+Bridge on 1560 but then you would need to upgrade both APs at the very least (and any other you have running)
To answer your question - You won't be able to host a Flex/Local switch WLAN off the MAP and it won't then drop 'locally' off the RAP - I imagine it would just break completely but it would need testing. TAC certainly wouldn't support it in the event of an issue.
Hello Community, I have an issue where APs do not connect to the WLC. Connection is made over VPN. Until yesterday all 3 APfailed with below errors. We change the LAN connection to a cisco router and now one of the AP magically connected to the...
Where to download
Attached files on this post
Alternatively, cloud version (only summaries)
New implementation for the WLC Config Analyzer. it is a new re-write of the application, with clean up and improved checks
Support for IOS...
Cisco Champion Radio · S8|E6: Fastlane+ Optimizes Network and Device Communication
Cisco Fastlane+ is a co-developed solution with Apple that significantly improves the experience of any Wi-Fi 6 capable iPhone or iPad connected to a Cisco Catalyst 9130 A...
We are pleased to announce the immediate availability of the IOS-XE release 17.4.1 for the Catalyst Wireless Controllers. The new code is now posted on the CCO and can be found at this link:
Table of Contents
The purpose of this document is to provide step-by-step instructions regarding how to connect your read-only Catalyst 9800 WLC or AireOS WLC with Cisco DNA Center for Assurance monitoring through manual configuration. I...