02-26-2021 12:40 AM - edited 07-05-2021 01:17 PM
Hello
i have acces point 1130AG and i want to configure " Security: Global SSID Manager" but i can't save cpnfigure from interface web ap ..
so i can allow AP accept paramter " Security: Global SSID Manager" that i can see SSID !!
i want ssid: test-wifi and password: 123456789
but the ap can't accpet the sauvegarde !!
Static WEP Key Option |
This setting uses mandatory WEP encryption, no key management and open authentication. |
i wait from expert wireless a reply and a help
thanks in advance
Solved! Go to Solution.
02-26-2021 02:23 AM
Most if the time...Cisco Autonomosu AP's GUI slow.
bets way is to configure by CLI.
https://rscciew.wordpress.com/2014/05/24/single-ssid-configuration-on-autonomous-ap/
https://mrncciew.com/2013/03/02/autonomous-ap-with-wpa-psk-security/
Regards
Dont forget to rate helpful posts
02-26-2021 03:57 AM
02-26-2021 04:58 AM
use this:
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption mode ciphers aes-ccm
!
ssid sotetel
!mbssid > remove it
Regards
Dont forget to arte helpful posts
02-26-2021 01:36 AM - edited 02-26-2021 02:15 AM
Product/Model Number: AIR-AP1131G-E-K9
Top Assembly Serial Number: FCZ1331Q3FN
System Software Filename: c1130-k9w7-tar.124-3g.JA1
System Software Version: 12.4(3g)JA1
Bootloader Version: 12.3(8)JEA
I send a picture that explain the problem ...
I want to knwo why any think configured that is not saved !!!
Please i wait a reply from expert wirless that help me
02-26-2021 02:23 AM
Most if the time...Cisco Autonomosu AP's GUI slow.
bets way is to configure by CLI.
https://rscciew.wordpress.com/2014/05/24/single-ssid-configuration-on-autonomous-ap/
https://mrncciew.com/2013/03/02/autonomous-ap-with-wpa-psk-security/
Regards
Dont forget to rate helpful posts
02-26-2021 03:34 AM
Thanks to reply me and i try used the link 1:
https://rscciew.wordpress.com/2014/05/24/single-ssid-configuration-on-autonomous-ap/
i configure step 1 ok
But in step 2 : it show this error message
ap(config)#interface dot11Radio 0
ap(config-if)#ss
ap(config-if)#ssid sotetel
Dot11Radio0: Guest-ssid already existing on ssid TOURGUENESS-1
ap(config-if)#
so how i can delete this ssid TOURGUENESS-1 with CLI and allow one ssid in AP1130 cisco !!
i wait to reply and thanks in advance
02-26-2021 03:41 AM
HOW i can delete this scrpit !!! that allow me use only one ssid
dot11 ssid TOURGUENESS-1
authentication open
authentication key-management wpa
guest-mode
wpa-psk ascii 7 091D1C5A4D5041455355
thanks in adv
02-26-2021 03:57 AM
to delete a ssid:
use this command # no dot11 ssid TOURGUENESS-1 #
02-26-2021 04:18 AM
ap#show running-config
Building configuration...
Current configuration : 1393 bytes
!
version 12.4
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ap
!
enable secret 5 $1$ReXG$gQatPCn01FRR0mIYN2WPI0
!
no aaa new-model
!
resource policy
!
ip subnet-zero
ip domain name ati
ip name-server 193.95.67.22
!
!
!
dot11 ssid sotetel
authentication open
authentication key-management wpa version 2
guest-mode
mbssid guest-mode
wpa-psk ascii 7 135445415F59527D737D
!
power inline negotiation prestandard source
!
!
username Cisco password 7 01300F175804
!
bridge irb
!
!
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption mode ciphers aes-ccm
!
ssid sotetel
!
mbssid
channel 2437
station-role root
bridge-group 1
bridge-group 1 subscriber-loop-control
bridge-group 1 block-unknown-source
no bridge-group 1 source-learning
no bridge-group 1 unicast-flooding
bridge-group 1 spanning-disabled
!
interface FastEthernet0
no ip address
no ip route-cache
duplex auto
speed auto
bridge-group 1
no bridge-group 1 source-learning
bridge-group 1 spanning-disabled
!
interface BVI1
ip address 192.168.1.5 255.255.255.0
no ip route-cache
!
ip default-gateway 192.168.1.1
ip http server
no ip http secure-server
ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag
bridge 1 route ip
!
!
!
line con 0
line vty 0 4
login local
!
end
ap#
I need configure this AP 11300 with ssid sotetel and password 123456789
but SSID is not brodcsat and
ap#show dot11 associations
ap#
so what do you think about configuration !!! what's command that i can add to scrpit !!!
i wait a reply and your help
thanks in adv
02-26-2021 04:58 AM
use this:
interface Dot11Radio0
no ip address
no ip route-cache
!
encryption mode ciphers aes-ccm
!
ssid sotetel
!mbssid > remove it
Regards
Dont forget to arte helpful posts
02-26-2021 05:11 AM
Thank you very much ...you are an excellent expert wireless in world ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: