Access Point C9120AXI-S to mount above the ceiling

[ftarcena]

What is the recommended height to mount the Access Point C9120AXI-S to mount above the ceiling, below are the clean room areas?

[Gaurav Kansal]

Hi

You can go through the below link it will help you

Cisco Catalyst 9120AX series access points can be mounted in several configurations – on a suspended ceiling, on a hard ceiling or wall, on an electrical or network box, and above a suspended ceiling.

For access point mounting instructions, go to the following URL:

http://www.cisco.com/c/en/us/td/docs/wireless/access_point/mounting/guide/apmount.html

https://www.cisco.com/c/en/us/td/docs/wireless/access_point/9120ax/quick/guide/ap9120ax-getstart.html#pgfId-111722

Good luck

[ftarcena]

Thanks Gaurav for the information. It helps this information.

[Leo Laohoo]

---

@ftarcena wrote:
What is the recommended height to mount the Access Point C9120AXI-S to mount above the ceiling

---

Do not install APs inside ceiling spaces/cavities. 

We have a significant quantities in surgical/sterile environment and we just put a clear plastic "bubble" around them and they are good enough to pose no risk to patients.